Panasonic KX-NS1000 Pc Programming Manual page 371

Supplementary Service
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Port Type
Selects the port type.
Each ISDN connection in a QSIG network must have a master port on one PBX and a slave port on another
PBX. ISDN extensions can belong to an incoming call distribution group or idle extension hunting group. In
this case, an MSN can be assigned.
Value Range
CO: For connecting to public network
Extension: For connecting to extension
QSIG-Slave: For connecting to private network (slave port)
QSIG-Master: For connecting to private network (master port)
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS,
AOC-D, AOC-E, 3PTY
Specifies whether each ISDN or QSIG supplementary service is used.
Value Range
For COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E:
No, Yes
For 3PTY:
No, Yes-3Pty
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
PC Programming Manual 371