Caller Id Signal Type - Panasonic KX-NS1000 Pc Programming Manual

Channel Seizure Wait Time
Specifies the length of time that the PBX waits before starting to send the seizure signal following the first ring
when sending Caller ID information to an SLT.
Value Range
64 ´ n (n=5–35) ms
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID

Caller ID Signal Type

Specifies the type of signal modulation to be used when sending Caller ID information to an SLT (reference
only).
Value Range
FSK
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Additional Local Trunk Access Code to Extension Caller ID
Enables the PBX to automatically add a Trunk Access number to the received telephone number when sending
the Caller ID number of an incoming trunk call to an SLT.
Value Range
Disable, Enable
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Send Caller ID Date & Time to Extension
Enables the PBX to send the date and time of an incoming call when sending Caller ID information to an SLT.
10.10 PBX Configuration—[2-10] System—Extension CID Settings
PC Programming Manual 517