Panasonic KX-NS1000 Pc Programming Manual page 510

10.9 PBX Configuration—[2-9] System—System Options
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.20.1 Message Waiting
Whisper OHCA—for SLT
Enables the use of Whisper OHCA to SLTs and IP-PTs
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.10.4.4 Whisper OHCA
Call Waiting—Automatic Call Waiting for Extension Call
Selects whether Busy Station Signalling (BSS) is automatically performed when an extension user calls a busy
extension.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.1.3.3 Call Waiting
Busy Out—Busy Out for Analogue CO
Enables the PBX to automatically set a trunk to Busy Out status when a loop current is not detected, preventing
that trunk from being used.
Value Range
Disable, Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
510 PC Programming Manual