Panasonic KX-NS1000 Pc Programming Manual page 366

9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Feature Guide References
5.2.5.1 ISDN Extension
Ring Mode (ISDN MSN Last No. 0 or 00)
Selects the ring mode when receiving an incoming call with an MSN ending with "0" or "00". This setting is only
available when Port Type on this screen is set to Extension.
Value Range
Ring All Extension for MSN: Ring all ISDN extensions that are addressed with MSN.
Ring an Extension for MSN: Ring only one of the ISDN extensions that are addressed with MSN.
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Feature Guide References
5.2.5.1 ISDN Extension
ISDN Extension Progress Tone
Enables the PBX to send call progress tones to the ISDN extension. This setting is only available when Port
Type on this screen is set to Extension.
Value Range
Disable, Enable
Maintenance Console Location
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
Feature Guide References
5.2.5.1 ISDN Extension
366 PC Programming Manual