Panasonic KX-NS1000 Pc Programming Manual page 859

Feature Guide References
3.2.1.33 No DTMF Input Operation
Name Entry
Number of Digits to Entry Name (3-4 digits)
Specifies the number of digits (letters) that must be entered when using the Dial by Name feature, which allows
callers to connect themselves with the desired party by entering the first 3 or 4 letters of the party's name.
Value Range
3–4 digits
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.16 Dialling by Name
Name Entry Time Out (1-10 s)
Specifies the length of time that the system waits for the caller to enter the first 3 or 4 digits (letters) of the
desired party's name. If the required number of digits are not dialled within this time, the previous menu will
be played again for the caller.
Value Range
1–10 s
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.16 Dialling by Name
Key Mode
Specifies the standard used for keypad text entry. If set to use the North American Standard, press [7] for
"Q" and [9] for "Z", If set to use the Australasian Standard, press [1] for "Q" and "Z".
Value Range
North American Standard, Australasian Standard
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
23.2 UM Configuration—[4-2] Service Settings—Parameters
PC Programming Manual 859