Panasonic KX-NS1000 Pc Programming Manual page 449

PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, 3PTY
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, AOC-D, AOC-E, E911, 3PTY
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
4.3.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Switch CLIP of CO Line / Extension
Specifies the feature number used to send either the CLIP number of the trunk in use (subscriber's number)
or the extension to the network.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
PC Programming Manual References
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port—ISDN CO—
Number
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—CO Setting—
Number
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—CLIP—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—CLIP—
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
MCID
Specifies the feature number used to ask the telephone company to trace a malicious call. This feature can
be used during a call or while hearing a reorder tone after the caller hangs up.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Feature Guide References
4.1.2.9 Malicious Call Identification (MCID)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Subscriber
Subscriber
CLIP ID
CLIP ID
PC Programming Manual 449