Panasonic KX-NS1000 Pc Programming Manual page 49

Site Selection Menu
When you are logged in to the Master unit of a One-look network and you are viewing programming screens
in the tree view, a site selection drop-down menu is displayed with each PBX site's name and ID number. You
can select a PBX site in the One-look network from the drop-down menu to programme items for that site.
Note
On some screens, the site selection menu will be inactive. This means that the currently displayed
programming items are set for the Master unit PBX only, and cannot be set for each Slave unit.
Standard Buttons
There are standard buttons that are displayed on many screens within the Maintenance Console.
The standard buttons are as follows:
Button
OK
Cancel
Apply
Copying and Pasting Data
Many setting items in Web Maintenance Console can be copied and pasted to other items on the same screen.
When the icon is displayed, clicking it will open a menu where you can specify the copy source and the
paste destinations.
1.
On a programming screen, click
Note
The icon may not be displayed for some programming screens.
2.
Select the copy source from the Copy From drop-down menu.
3.
In Copy To, select one or more paste destinations. Hold down the "Ctrl" key and click to select destinations
one at a time, or hold down the "Shift" key and click to select a range of destinations.
4.
In Items, select one or more items to copy from the source selected in Copy From. Hold down the "Ctrl"
key and click to select items one at a time, or hold down the "Shift" key and click to select a range of items.
5.
Click Copy. The programming item(s) selected in Items for the copy source specified in Copy From will
be copied to the destination(s) specified in Copy To.
Individual items can also be copied and pasted in a manner similar to other software programmes. Press
"Ctrl"+"c" to copy a highlighted (orange-colored) programming item entry, select a target cell by pressing the
keyboard arrow keys, and then press "Ctrl"+"v" to paste the copied information to the selected cell.
Temporarily implements changes to the system's memory (DRAM)
and closes the current screen.
Abandons changes and closes the current screen.
Temporarily implements changes to the system's memory (DRAM)
and remains on the same screen.
. The copy window will be displayed.
Function
PC Programming Manual
2.1.5 Software Interface
49