Panasonic KX-NS1000 Pc Programming Manual page 378

9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
ISDN Centrex
Enables the use of the telephone company's ISDN Centrex Service features.
Value Range
Disable, Enable
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
Networking Data Transfer
Enables transmission of extension status data to connected PBXs in a network. This setting is only available
when Port Type on this screen has been set to QSIG-Slave or QSIG-Master.
Value Range
Off, On
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
PC Programming Manual References
Section 17 PBX Configuration—[9] Private Network
Feature Guide References
4.3.5.1 Network Direct Station Selection (NDSS)
Loopback Test started by Network
Enables a loopback test started from the network side, to be performed on the PRI23 card.
Value Range
Disable, Enable
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
PC Programming Manual References
Network Loopback Test
378 PC Programming Manual