Panasonic KX-NS1000 Pc Programming Manual page 858

23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Operator Transfer Mode
Specifies the timing of the operator transfer.
Value Range
Transfer immediately, Do not transfer immediately
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
No DTMF Input Operation
No DTMF Input Call Coverage for Day, Night, Lunch, and Break (Selection)
Specifies where a caller will be transferred when there is no DTMF input in response to system guidance (for
example, the caller is using a rotary phone) for each time mode.
Value Range
G.D.M.: The caller is transferred to the General Delivery Mailbox.
Operator: The caller is transferred to an operator.
Mailbox: The caller is transferred to the designated mailbox extension.
Extension: The caller is transferred to the designated extension.
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.33 No DTMF Input Operation
No DTMF Input Call Coverage for Day, Night, Lunch, and Break (Parameter)
Specifies the transfer destination if "Mailbox" or "Extension" is selected for
for Day, Night, Lunch, and Break (Selection).
Value Range
2–8 digits (for extensions)
2–[the value set in
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
858 PC Programming Manual
Mailbox No. Max. Length (3-8)] digits (for mailboxes)
No DTMF Input Call Coverage