Panasonic KX-NS1000 Pc Programming Manual page 65

Icon
List View
Click this button to view the following information in a list format:
•
•
•
•
•
•
•
•
•
•
•
•
You can also perform PBX site management from this screen:
•
•
2.
Master unit PBX icon
This is the icon and unit name representing the Master unit PBX. Click this icon to open the Setup Screen
for this PBX. You can also right-click the icon and select to open either the Setup Screen or the Maintenance
Screen.
Right-click the icon and select Normal Mode in the following cases:
•
The Master unit is offline and not operating, and you want to restore the Master unit to normal operation.
•
There has been a connection error with one or more Slave units, and you want to restore their
connection to the Master unit in the One-look network.
3.
PBX information
•
The time of when Web Maintenance Console last received information from the PBX is displayed.
•
The uptime of the PBX is displayed (the total time since the PBX was last reset).
4.
Slave unit PBX icons
These 15 icons represent Slave unit PBXs under the control of the Master unit PBX. Units that have been
registered display a unit name and are coloured in. Remaining available unit positions are shown as greyed
out. You can right-click a registered PBX and select Maintenance, Setup, or Direct Login for that PBX.
Selecting Direct Login will display the Login screen for that PBX. For details about the login procedure,
see 2.1.3 Logging in to Web Maintenance Console.
Site status indicator
Site ID (1–16)
Site Name
Location (MIB)
Specified at MIB info—SysLocation in 27.3.3 Network Service—[3-3]
Client Feature—SNMP Agent.
Status (INS or OUS)
PBX Mode
IP Address
MAC Address
PBX Version (software version)
PBX Region
Data Version
SRAM Version
Click Registration to register Slave units that have been added using the Add
Site Wizard. For details, see 3.1.1 Home Screen—Add Site Wizard. You can
also click De-Registration or Forced De-Registration to remove Slave units
from the One-look network.
–
When logged in to a Slave unit, only information for that Slave unit and the
Master unit is displayed.
–
You can register or de-register Slave units only in On-line mode.
In the Backup Master drop-down list, select a site to designate it as the Backup
Master site, and then click OK. For details, see 1.2.3.1 One-look Networking
Survivability.
Note
If you have already designated a Backup Master site and want to select a
different site, first select Unassigned and click OK. Then, select the new
Backup Master site.
Description
3.1 Home Screen
PC Programming Manual 65