Pbx Configuration-[6-4] Feature-Second Dial Tone - Panasonic KX-NS1000 Pc Programming Manual

14.4 PBX Configuration—[6-4] Feature—Second Dial Tone
14.4 PBX Configuration—[6-4] Feature—Second Dial
Tone
A programmed Pause time can be inserted automatically between the Second Dial Tone Waiting code and
the following digits. When a programmed Second Dial Tone Waiting code is dialled after seizing a trunk, a
pre-programmed number of pauses are inserted after the code.
A maximum of 100 Second Dial Tone Waiting codes can be programmed. 20 codes are displayed at a time.
To display other sets of codes, click the applicable tab.
Second Dial Tone Waiting Code
Specifies the Second Dial Tone Waiting code.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
14.4 PBX Configuration—[6-4] Feature—Second Dial Tone
Feature Guide References
2.5.4.7 Pause Insertion
Pause Repeating Counter
Specifies the number of pauses to be inserted when waiting for the second dial tone.
Value Range
0–20
Maintenance Console Location
14.4 PBX Configuration—[6-4] Feature—Second Dial Tone
Feature Guide References
2.5.4.7 Pause Insertion
708 PC Programming Manual