Panasonic KX-NS1000 Pc Programming Manual page 47

Button
Setup Screen
3.
Web Maintenance Console Features
Clicking these buttons provides features for Web Maintenance Console, as follows:
Button
Clicking this button will save any changes made to settings to the Storage Memory
Card. Programming changes that are not saved will be lost if the PBX is reset or is
turned off. Changes may also be lost if Web Maintenance Console is suddenly
Save Data terminated or the PC running Web Maintenance Console loses power unexpectedly.
Be sure to save the data periodically while programming, especially during long
programming sessions.
Clicking this button displays the Web Maintenance Console software version,
copyright notices, and licences.
Note
System
Information
Clicking this button will save any programming changes to the PBX's Storage Memory
Card and log you out of Web Maintenance Console. For more information, see
2.2 Logout.
Logout
4.
Home Screen/Tree View
The Home Screen (shown above) displays the PBX icon view or PBX list view. The information and status
of PBXs in the One-look network can be managed and confirmed. For more information, see 3.1 Home
Screen.
When the Maintenance Screen or Setup Screen is selected, the tree view is displayed. The tree view is
used to display PBX setting items. Setting items are listed in categories, and by clicking items in the tree,
setting items are displayed to the right in the settings programming area. Some tree items have
sub-categories with additional options and settings. Clicking a sub-category will open an additional layer
of settings. Below is a summary of the tree view menu items for the Setup Screen and the Maintenance
Screen.
Maintenance Screen Tree View Items
Item
Status
Clicking this button will display the Setup Screen tree view items. From the Setup
Screen, you can:
•
Configure PBX hardware and virtual cards
•
Programme settings for extensions and call handling
•
Configure network settings and auxiliary PBX functions
•
Configure the Unified Messaging (UM) system
For more information, see Setup Screen Tree View Items below.
Licence information is not displayed when programming in Off-line mode.
•
Check the status of the PBX's system hardware
•
Check the status of PBX equipment (PSs, CSs, UPS, etc.)
•
Check the status of extensions used by the Unified Messaging system
For details, see Section 4 Status.
Description
Description
Primary Functions
2.1.5 Software Interface
PC Programming Manual 47