Panasonic KX-NS1000 Pc Programming Manual page 856

23.2 UM Configuration—[4-2] Service Settings—Parameters
Value Range
Enable, Disable
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Call Hold Mode—Call Retrieval Announcement Timing (1-30 s)
Specifies the interval between the voice guidance message that asks whether or not calls are to be retrieved
during call holding.
Example: "To cancel holding, press 2 now. Otherwise, I'll try your party again."
Value Range
1–30 s
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Call Hold Mode—Redial Cancel Timing (s)
Specifies the interval between the voice guidance messages that ask if continuous redials are to be attempted
during call holding.
Example: "To continue holding, press 1. Otherwise, press 2."
Value Range
15, 30, 45, 60 s
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Alternate Extension
Specifies extensions that require a different transfer sequence than normal. Calls to these extensions will be
transferred according with the setting for 24.4 UM Configuration—[5-4] System
Parameters—Parameters—
digits / [0-9 * # D R F T X , ;]).Click Edit and follow the steps below to edit an alternate extension.
856 PC Programming Manual
PBX Environment—Alternate Extension Transfer Sequence (Up to 16