Pbx Configuration-[3-11-2] Group-Vm(Dpt) Group-Unit Settings-Member List - Panasonic KX-NS1000 Pc Programming Manual

11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings
11.11.2.1 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit
Settings—Member List
Displays information on the settings of all relevant ports.
Only ports set to VM(DPT) for DPT Type—Type in the extension's Port Property screen will be displayed. For
details, see To access port properties in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Notice
This screen is for programming legacy gateway PBXs. For information about setting up a legacy gateway
PBX, see 9.29 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.
Unless noted otherwise, the programming information is the same as described in the PC Programming
Manual of the legacy gateway PBX. Refer to the corresponding Group—VM(DPT) Group—Unit
Settings—Member List section in the PC Programming Manual of the legacy gateway PBX for more
information.
The Site, Shelf, and Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
582 PC Programming Manual