Panasonic KX-NS1000 Pc Programming Manual page 377

Subscriber Number
Specifies the number used as the CLIP number.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Feature Guide References
4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
ISDN Outgoing Call Type
Selects the method used to send dialled digits to the network.
Value Range
En-bloc: The PBX sends all of the dialled digits at once after the extension user completes dialling. The PBX
recognises the end of dialling when (1) # is dialled, if programmed, (2) a pre-programmed telephone number
is dialled, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialled digits one at a time.
Maintenance Console Location
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
PC Programming Manual References
9.1 PBX Configuration—[1-1] Configuration—Slot
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Inter-digit
10.9 PBX Configuration—[2-9] System—System Options—Option 2—
Dial for en Bloc mode
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialling Plan
Feature Guide References
4.1.2.1 Integrated Services Digital Network (ISDN)—SUMMARY
9.28 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Dial—Extension
ISDN en Bloc Dial—[#] as End of
PC Programming Manual 377