Um Configuration-[4-2] Service Settings-Parameters - Panasonic KX-NS1000 Pc Programming Manual

23.2 UM Configuration—[4-2] Service Settings—Parameters
23.2 UM Configuration—[4-2] Service
Settings—Parameters
Automated Attendant
Wait Time for First Digit (0-20 s)
Specifies the length of time the system waits for the caller to dial a digit before assuming the caller cannot input
a DTMF signal and therefore activates No DTMF Input Call Coverage
Value Range
0–20 s
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Menu Repeat Cycle (1-5 times)
Specifies the number of times the system will play the Automated Attendant top menu if the caller does not
make a selection.
Value Range
1–5 times
Maintenance Console Location
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing—23.2 UM Configuration—[4-2]
Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Play Owner's Name during Transfer
Determines whether "Transferring you to (name)" is announced to the caller before transferring the caller to
an extension.
Value Range
Enable, Disable
Maintenance Console Location
23.2 UM Configuration—[4-2] Service Settings—Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
852 PC Programming Manual