Internet Fax Control - Fuji Xerox DocuCentre-IV 2060 Administrator's Manual

G3 Line 1 to 3 - Dial Type
G3 Line 1 to 3 - Line Type
SIP Line - Company Logo
G3 SIP Line - ID

Internet Fax Control

Internet Fax Path
Profile for Broadcast Job
Downloaded From ManualsPrinter.com Manuals
Set the dial type.
Tone
Tone dialing line.
10pps
Pulse dialing line.
Set the line type.
PSTN
Subscriber telephone line.
PBX
Private branch exchange.
Register the sender names for IP fax (SIP). The sender name is printed in the Transmission
Header Text or Cover Page. Enter up to 60 characters using the keyboard displayed or the
numeric keypad.
When using G3 communications, register the G3 ID for IP fax (SIP).
Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.
You can configure the settings related to the Internet fax control.
Set the Internet fax communication path.
Via E-mail Server
Sends e-mail via an SMTP server.
Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without going through an SMTP
server.
You can specify the following two types of e-mail address for the Internet Fax feature:
Specifying a host name
@ must be followed by FQDN.
Example: local-part@device.domain.jp
Specifying an IP address
@ must be followed by an IP address with brackets.
Example: local-part@[129.249.123.1]
Set the default value for an Internet fax profile when performing an Internet fax broadcast
send.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-enabled machines.
Important • The supported TIFF-file profiles vary depending on the destination Internet Fax-enabled
machine. Before specifying a profile, check the profile that the destination machine supports.
Fax Service Settings
5
191