Fuji Xerox DocuCentre-IV 2060 Administrator's Manual page 251

Hide thumbs Also See for DocuCentre-IV 2060:
Table of Contents

Advertisement

Downloaded From ManualsPrinter.com Manuals
Supported interfaces
- 1000BASE-T
- 100BASE-TX
- 10BASE-T
Note
• Gigabit Ethernet Kit (optional) is required for using 1000BASE-T. For more information,
please contact our Customer Support Center.
Supported frame types
- Ethernet II specification
- IEEE802.3 specification
- IEEE802.3 / IEEE802.2 specification
- IEEE802.3 / IEEE802.2 / SNAP specification
Note
• The machine sends out packets of each frame type on the network, and will initialize for the
same frame type as that of the first reply packet received. The frame type can also be fixed.
If, however, there are multiple protocols running on the same network, use Ethernet II
specification.
• Some network equipment, such as hubs, may not be compatible with the automatic frame
type detection. If a data link indicator corresponding to the port of the network equipment
connected with the machine is not lit up, change the frame type settings of the machine
accordingly with that of the file server. Use CentreWare Internet Services to change these
settings.
For more information on how to set up the machine using NetWare, refer to "Installation When Using
NetWare" (P.256).
SMB
Use SMB to print using Microsoft Networks.
For more information on how to set up the machine using SMB, refer to "Installation When Using
Microsoft Network (SMB)" (P.259).
IPP
Use IPP to print via the Internet.
For more information on how to set up the machine using IPP, refer to "Installation When Using Internet
Printing Protocol (IPP)" (P.261).
Port 9100
Use Port9100 when the machine uses Port9100.
For more information on how to set up the machine using Port 9100, refer to "Installation When Using
TCP/IP (LPD/Port 9100)" (P.253).
EtherTalk
Use EtherTalk when you print from a Macintosh computer.
Note
• The Adobe PostScript 3 Kit (optional) is required.
For more information on how to set up the machine using EtherTalk, refer to "Installation When Using
EtherTalk" (P.263).
Print Overview
7
249

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-iv 3060Docucentre-iv 3065

Table of Contents