Scan Service Settings; First Tab - Fuji Xerox DocuCentre-IV 2060 Administrator's Manual

Scan Service Settings

1
2

First Tab

Feature in 2nd Column
Reduce/Enlarge - Buttons 2 to 5
Downloaded From ManualsPrinter.com Manuals
In [Scan Service Settings], you can configure settings related to the Scan services.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• When [Scan to Fax Server] is selected in the System Settings, [Scan Service Settings] is
replaced with [Scan/Fax Service Settings].
For information on scanner environment settings, refer to "Scanner Environment Settings" (P.273).
The following shows the reference section for each setting.
First Tab ................................................................................................................................... 175
Scan Defaults............................................................................................................................ 176
Scan to PC Defaults.................................................................................................................. 178
Original Size Defaults .............................................................................................................. 178
Output Size Defaults ................................................................................................................ 179
Reduce/Enlarge Presets ............................................................................................................ 179
Other Settings........................................................................................................................... 179
On the [Tools] screen, select [Scan Service Settings].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.98).
Select an item to set or change.
The First Tab means the screen displayed when you select the following tabs in the [E-
mail], [Store to Folder], [Network Scanning], [Scan to PC], [Store & Send Link], [Store
to USB], and [Store to WSD] screens.
The [E-mail] tab of the E-mail service
The [Store to Folder] tab of the Store to Folder service
The [Network Scanning] tab of the Network Scanning service
The [Scan to PC] tab of the Scan to PC service
The [Store & Send Link] tab of the Store & Send Link service
The [Store to USB] tab of the Store to USB service
The [Store to WSD] tab of the Store to WSD service
You can set the features that appear in the second column of the lower part in the First Tab
screen.
You can select from [2 Sided Scanning], [Resolution], [Lighten/Darken], and [Reduce/
Enlarge].
This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd Column].
Select the magnification ratio displayed in [Reduce/Enlarge] from the Reduce/Enlarge
Presets registered.
For information about Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.179).

Scan Service Settings

175
5