Notes And Restrictions On Job Flows - Fuji Xerox DocuCentre-IV 2060 Administrator's Manual

16 Appendix

Notes and Restrictions on Job Flows

Notes and Restrictions on the Security Features
16
594
Downloaded From ManualsPrinter.com Manuals
Job Flows
If you transfer fax or Internet fax documents via SMB, FTP, or E-mail, the documents
will be converted into the standard size (such as A4 and A3) and printed.
If a Job Flow is performed with the following settings, an interference pattern may be
created:
- Original Type: [Photo & Text] or [Photo]
- Resolution: [400 dpi] or [600 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-S]
If an interference pattern is created, change the settings as follows:
- Resolution: [200 dpi] or [300 dpi]
- Internet fax profile for sending Internet faxes: [TIFF-F] or [TIFF-J]
Job Flow Settings for High Compression Format
When [MRC High Compression] is set to [On] under [File Format] for the Scan features,
select one of the alternatives for each setting item:
- Color Scanning: [Auto Detect], [Color], or [Grayscale]
- Resolution: [200 dpi] or [300 dpi]
- Reduce / Enlarge: [100%]
- File Format (without thumbnail specification): [PDF], [DocuWorks], or [XPS]
- File Format (with thumbnail specification): [DocuWorks] or [XPS]
Important • If settings other than the above are used, you can register a Job Flow sheet on the machine,
but an error occurs when the machine executes the Job Flow and the Job Flow cannot be
carried out.
Addresses Registered on Job Flows
If you specify a speed dial or an address registered on the Address Book when creating
a job flow on the machine, any subsequent change of the number or address on the
Address Book is not reflected on the job flow created. To transmit to the changed
address, you must directly correct the address registered on the job flow.
Encrypted Communication
Encrypting HTTP communication enables you to encrypt communication data for IPP
printing (SSL encrypted communication). The data is encrypted only on the network,
but send data itself is not encrypted.
Allow User to Disable Active Settings (for Forcible Printing Features)
This feature cannot apply to the ordinary print jobs. This feature is applicable to the jobs
stored in the machine and then printed by the instruction from the touch screen, such
as Copy, Secure Print, Private Charge Print, Store in Remote Folder, Media Print - Text
jobs.