Internal Storage And Recall - Rigol MSO4000 User Manual

13 Store and Recall

Internal Storage and Recall

Internal storage and recall support "Setups" in Storage. In the following section, the
storage and recall method and procedures are introduced.
1. Save the specified oscilloscope setting in internal memory.
1) Connect the signal to the oscilloscope and obtain a stable waveform.
2) Press Storage  Storage to select "Setups" and press Save to turn on the
interface as shown in Figure a. use
turn green) and press down
3) As shown in Figure b, the local disk can store at most 10 setting files. Use
to select the desired storage position, Save is illuminated and then press
the softkey to execute the saving operation. If the current position contains
a file, the original file can be overwritten or be delected by pressing Delete.
Use to select
previous directory.
MSO4000/DS4000 User's Guide
to select "Local Disk" (the characters
to open the local disk (Figure b).
and then press down
RIGOL
Figure a
to return to the
13-5