Rigol MSO4000 User Manual page 268

RIGOL
5. Communication test
Right click the resource name "MSO4054 (TCPIP::172.16.3.118::INSTR)" to
select "SCPI Panel Control" to turn on the remote command control panel (as
shown in the figure below) through which you can send commands and read
data.
6. Load LXI webpage
As this oscilloscope conforms to LXI-C standards, you can load LXI webpage
through Ultra Sigma (right-click the resource name and select LXI-Web; or
directly input the IP address in the browser). Various important information
about the oscilloscope (including the model number, manufacturer, serial
number, description, MAC address and IP address) will be displayed on the
webpage.
15-8
15 Remote Control
MSO4000/DS4000 User's Guide