Division - Rigol MSO4000 User Manual

RIGOL

Division

Divide the waveform voltage values of signal source A by that of source B point by
point and display the results. It can be used to analyze the multiple relationships of
waveforms in two channels. Note that when the voltage value of channel B is 0, the
result of the division is treated as 0.
Press MATH  Operate to select "A ÷ B":
Press Source A and Source B to select the desired channels. The channels

available are CH1, CH2, CH3 and CH4.
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

HORIZONTAL

used to adjust the horizontal position and scale of the operation results.
6-4
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
6 To Make Measurements
SCALE can also be
MSO4000/DS4000 User's Guide