Substraction; Multiplication - Rigol MSO4000 User Manual

6 To Make Measurements

Substraction

Subtract the waveform voltage values of signal source B from that of source A point
by point and display the results.
Press MATH  Operate to select "A-B":
Press Source A and Source B to select the desired channels. The channels

available are CH1, CH2, CH3 and CH4.
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

HORIZONTAL

used to adjust the horizontal position and scale of the operation results.

Multiplication

Multiply the waveform voltage values of signal source A and B point by point and
display the results.
Press MATH  Operate to select "A x B":
Press Source A and Source B to select the desired channels. The channels

available are CH1, CH2, CH3 and CH4.
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

HORIZONTAL

used to adjust the horizontal position and scale of the operation results.
MSO4000D/S4000 User's Guide
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
POSITION and HORIZONTAL
RIGOL
SCALE can also be
SCALE can also be
6-3