Record Constant On - Rigol MSO4000 User Manual

RIGOL

Record Constant On

MSO4000/DS4000 provides record "Open" (record constant on) mode for waveform
record. When this mode is enabled, the oscilloscope records the waveform
continuously according to the current memory depth. The length of waveform
recorded is limited by the memory depth and the waveform data recorded before will
be overwritten by the waveform currently recorded. In this mode, the other
oscilloscope operations (except
Sample Mode, Sample Rate
are not affected.
Press Record  Mode and use
record key at the front panel turns red and the oscilloscope records the
waveform continuously according to the current memory depth until users press
RUN/STOP. At this point, users can play back or analyze the waveform.
11-4
Pass/Fail Test
as well as
and Memory Depth
to select "Open". At this point, the waveform
11 Waveform Record
Acquisition
in the sample system setting)
MSO4000/DS4000 User's Guide
Mode,