To Set The Color; To Select Ref Source; To Save To Internal Memory - Rigol MSO4000 User Manual

9 Reference Waveform RIGOL

To Set the Color

MSO4000/DS4000 series oscilloscope provides five colors (gray, green, light blue,
magenta and orange) to mark the reference waveforms of different channels in order
to distinguish them.
Press Current and use
to select any of the reference channel (Ref1-Ref10)
enabled. Then, press Color to specify a different color for the reference waveform of
that channel.

To Select REF Source

Press Current and use
to select any reference channel (Ref1 to Ref10) that has
been turned on and then press Source to specify a reference source (CH1 to CH4,
MATH or D0-D15) for this channel.

To Save to Internal Memory

Press Save to save the waveform (screen region) in the specified source to internal
memory as reference waveform and display it on the screen. Note that this operation
only saves the reference waveform in the volatile memory and the waveform will be
cleared at power-off.
MSO4000D/S4000 User's Guide
9-3