Internal Storage And Recall - Rigol MSO2000A Series User Manual

Chapter 14 Store and Recall

Internal Storage and Recall

Internal storage and recall support "Setups" in Storage. In the following part, the
storage and recall method and procedures are introduced.
1. Save the specified oscilloscope setting in internal memory.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press Storage  Storage to select "Setups" and press Save to turn on the
3) The local disk can store at most 10 setting files. Use
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
disk management interface. Use
turn green) and press down
14-2.
desired storage position, Save is illuminated and then press the softkey to
execute the saving operation. If the current position contains a file, the
original file can be overwritten or be deleted by pressing Delete. Use
select and then press down
Figure 14-2 Local Disk (Save)
Note: In internal storage, New File and New Folder are not available.
GlobalTestSupply
www.
to select "Local Disk" (the characters
to open the local disk, as shown in Figure
to return to the previous directory.
.com
RIGOL
to select the
to
14-5
sales@GlobalTestSupply.co