System Information; Power-Off Recall - Rigol MSO4000 User Manual

RIGOL

System Information

Press Utility  System  System Info to view the version information of your
oscilloscope. The system information contains the following contents as shown in the
figure below.

Power-off Recall

You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off.
Press Utility  System  Power On to select "Last" (default) or "Default".
Last: return to the setting of the system at last power-off.

Default: return to the factory setting of the system.

14-8
14 System Function Setting
MSO4000/DS4000 User's Guide