Rigol MSO4000 User Manual page 135

6 To Make Measurements
Press MATH  Operate to select "Logic":
Press Log.Formula to select the desired operation expression and the default is

"AND".
Press Source A and Source B to select the desired channels. The channels

available are CH1, CH2, CH3 and CH4 or D0-D15.
Press and use

Press and use

Press Invert to turn the inverted display of the operation results on or off.

Press Threshold A and use

operation.
Press Threshold B and use

operation.
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.
MSO4000D/S4000 User's Guide
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
to set the threshold of source A in logic
to set the threshold of source B in logic
POSITION and HORIZONTAL
RIGOL
SCALE can also be
6-9