Record - Rigol MSO4000 User Manual

RIGOL
Display: press this key to enter the display setting menu to set the display type,

persistence time, wave intensity, grid type, grid brightness and menu display
time of the waveform.
Utility: press this key to enter the system function setting menu to set the

system-related functions or parameters, such as I/O setting, sound and
language. The oscilloscope also supports some advanced functions such as
pass/fail test and print setting.
Record: press this key to enter the waveform record menu to set the waveform

record and open (record constant on) mode.
Help: press this key to open the help interface. For detailed information, please

refer to the introduction in

Record

Stop Play/Pause Record
Play/Pause: in stop or pause state, press this key to play the recorded or paused
waveform and press again to pause the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform in record or playback mode. The backlight
is illuminated in orange.
Record: press this key to start recording the waveform. The backlight is illuminated
in red. Besides, the backlight will also be illuminated when the open (record constant
on) mode is enabled.
1-22
"To Use the Built-in Help
1 Quick Start
System".
MSO4000/DS4000 User's Guide