Logic Analyzer - Rigol MSO4000 User Manual

1 Quick Start

LOGIC ANALYZER

MSO4000/DS4000 User's Guide
LA: press this key to enter the logic analyzer setting

interface. You can enable or disable groups of channels or a
single channel, change the display size and the logic
threshold of the digital channels and group the 16 digital
channels and display them as a bus. You can also set a
label for each digital channel.
LA_ : this knob can be used to reposition the digital

channels. Press this knob to switch the digital channels
currently enabled. The selected number of the digital
channel (from small to large) will be highlighted in red.
Rotate the knob to move the digital channel to the desired
position and press this knob again to fix this channel.
RIGOL
1-23