Rigol MSO4000 User Manual page 75

3 To Set the Horizontal System
When X-Y mode is enabled,

The following functions are not available in X-Y mode:

Auto measure, cursor measure, math operation, reference waveform, delayed
sweep, vector display, HORIZONTAL
depth, acquisition mode, Pass/Fail test and waveform record.
Method 2: Use the shortcut measurement function
Please refer to "Phase A→B " and "Phase A→B " measurement functions of "Delay
and Phase" on page 6-16.
MSO4000/DS4000 User's Guide
Delayed Sweep
POSITION, trigger control, memory
will be disabled automatically.
RIGOL
3-7