Rigol MSO4000 User Manual page 206

RIGOL
5. End Frame
Press this softkey and use
is the total number of frames of the waveform to be played back.
6. Playback Operation
Waveform playback can be realized through the menu or the shortcut buttons at
the front panel.
7. Time Tag
The time tag is used to display the absolute recording time of each frame of the
waveform currently recorded. Press Time Tag to enable or disable the time tag
function. When it is enabled, the time tag information is displayed at the upper
right corner of the screen as shown in the figure below.
T : display the absolute starting time of the waveform record in
0
"Hour:Minute:Second Month Date" format.
ΔT: display the recording time deviation of the current waveform relative to the
first frame of waveform. This value changes accordingly during the waveform
playback process.
Menu
Press Operate and select " " to
start playing back.
Press Operate and select " " to
pause the playback.
Press Operate and select "■" to
stop the playback.
Tip
During waveform playback, RUN/STOP can be used to switch between playback
and pause. Each time SINGLE is pressed, the Current Frame moves one frame
forward.
11-6
to set the end frame of the playback. The default
Front Panel
Press ; the backlight goes on (in
yellow), indicating that the playback is
started.
Press again to pause the playback.
Press to stop the playback.
11 Waveform Record
MSO4000/DS4000 User's Guide