Rigol MSO4000 User Manual page 104

RIGOL
5 To Trigger the Oscilloscope
Trigger Mode:
Press Sweep to select the Trigger Mode (page 5-3) under this trigger type as auto,
normal or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameters (trigger coupling, trigger holdoff and
noise rejection) under this trigger type.
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
Level" on page 5-9.
description of "Trigger
MSO4000/DS4000 User's Guide
5-16