To Connect To Ac Power Supply - Rigol MSO4000 User Manual

RIGOL
1 Quick Start

To Connect to AC Power Supply

This oscilloscope accepts two kinds of AC power supplies: 100-127V, 45-440Hz and
100-240V, 45-65Hz. Please use the power cord supplied with the accessories to
connect the oscilloscope to the power source as shown in the figure below. Turn on
the power switch under the power plug. At this point, the oscilloscope is energized
and the power key at the lower-left corner of the front panel will pulse.
AC Power Input Terminal
Figure 1-5 To Connect to AC Power Supply
MSO4000/DS4000 User's Guide
1-6