Rigol MSO4000 User Manual page 248

RIGOL
1. Set the IP Address
The format of IP address is nnn.nnn.nnn.nnn; wherein, the range of the first
nnn is from 0 to 223 (except 127) and the ranges of the other three nnn are
from 0 to 255. You are recommended to ask your network administrator for an
IP address available.
Press IP Address and use
be saved in the non-volatile memory and if
DHCP and Auto IP will be "Off" and the oscilloscope will load the preset IP
address automatically at the next power-on.
2. Set the Subnet Mask
The format of the subnet mask is nnn.nnn.nnn.nnn; wherein, the range of the
nnn is from 0 to 255. You are recommended to ask your network administrator
for a subnet mask available.
Press Mask and use
saved in the non-volatile memory and if
DHCP and Auto IP will be "Off" and the oscilloscope will load the preset subnet
mask automatically at the next power-on.
Set the Gate
You can set this paramter In Auto IP and Static IP mode.
The format of the gate is nnn.nnn.nnn.nnn; wherein, the range of the first nnn is
from 0 to 223 (except 127) and the ranges of the other three nnn are from 0 to 255.
You are recommended to ask your network administrator for a gate address
available.
Press Gate and use
in the non-volatile memory and if
Auto IP will be "Off" and the oscilloscope will load the preset gate address
automatically at the next power-on.
14-4
to input the desired IP address. This setting will
to input the desired subnet mask. This setting will be
to input the desired gate address. This setting will be saved
Power-off Recall
14 System Function Setting
Power-off Recall
Power-off Recall
is set to "Last", DHCP and
MSO4000/DS4000 User's Guide
is set to "Last",
is set to "Last",