To Select The Logic Channel; To Turn On/Off The Logic Channel - Rigol MSO4000 User Manual

RIGOL

To Select the Logic Channel

Press CH/Group and use
Group1-Group4 as the current active channel (only the groups that contain digital
channels can be selected, please refer to the instruction in
current active channel. If "None" is selected, there is no channel selected. The labels
and waveform of the channels currently selected are highlighted in red. If any group
of Group1-Group4 is selected, the labels of all the channels and the waveform of the
first channel in the selected group are displayed in red.
Tip
You can move the channels currently selected to the desired position using the
LA_
, press this konb again to fix the channels and select the next channel or
group at the same time.

To Turn on/off the Logic Channel

Press On/Off to enter the "On/Off" setting menu of the digital channel.
Press D7-D0 to turn the channels (D7-D0) on or off at the same time.

Press D15-D8 to turn the channels (D15-D8) on or off at the same time.

Press Sel CH, use

or off.
Press Group, use

channels in the group on or off.
Note: Only the groups that contain digital channels can be selected. For how to
group the channels, plaese refer to the instruction
7-2
to select any channel of D0-D15 or any group of
to select the desired channel and press
to select the desired group and press
7 Logic Analyzer
Setting") as the
"Group
to turn it on
to turn the
Setting".
in"Group
MSO4000/DS4000 User's Guide