Reference Clock - Rigol MSO4000 User Manual

14 System Function Setting

Reference Clock

This oscilloscope can output the internal 10 MHz sample clock from the [10MHz
In/Out] connector at the rear panel and accept an external 10 MHz clock to
synchronize multiple oscilloscopes.
10MHz In/Out
Press Utility  RefClock to select the desired clock type.
ClockOutput: configure the [10MHz In/Out] connector as an output to output

the internal 10 MHz clock.
ClockInput: configure the [10MHz In/Out] connector as an input and the

oscilloscope will accept a 10 MHz clock input from this connector.
MSO4000/DS4000 User's Guide
RIGOL
14-15