Group Setting; To Set The Waveform Size - Rigol MSO4000 User Manual

7 Logic Analyzer

Group Setting

Press Group Set to enter the group setting menu and you can group 16 digital
channels.
Group：

Press Group1 to open the channel list (there is a status icon at the left of each
channel), use
channel into Group1. At this point, the corresponding status icon is
Group the other channels using the same method. Any channel can only be
grouped into one group. The channels grouped into other groups cannot be
selected and the status icon is
UnGroup

Press UnGroup to open the channel and group list, use
desired channel or group and press
channel selected or all the channels contained in the group selected.

To Set the Waveform Size

Press WaveSize to adjust the waveform size of the channels that have been turned
on, you can select S (small), M (medium) or L (large).
Note: L is only available when the number of active channels is not more than 8.
MSO4000D/S4000 User's Guide
to select the desired channel and press
. The channels with can be selected.
to cancel the grouping status of the
RIGOL
to group the
.
to select the
7-3