Option Management - Rigol MSO4000 User Manual

RIGOL

Option Management

This oscilloscope provides multiple options to fulfill your measurement requirements.
Please contact your RIGOL sales representative or RIGOL technical support to
order the corresponding options. You can view the options currently installed on the
oscilloscope or activate the newly bought option serial number through this menu.
Press Utility  Options  Installed to view the options currently installed on the
oscilloscope and the related information. Press Setup to enter the serial number
activation operation menu.
Editor: press this softkey to turn on the serial number input interface as shown

in the figure below. Use
press down the knob to input the character.
Serial Number Input Area
Backspace: press this softkey to delete the characters in the "Serial Number

Input Area" from the right to the left.
Clear: press this softkey to clear all the characters in the "Serial Number Input

Area".
Apply: press this softkey and the oscilloscope will activate the corresponding

option using the serial number currently input.
14-16
to select the characters on the virtual keyboard and
Character Selecting Area
14 System Function Setting
MSO4000/DS4000 User's Guide