Syslog; Network Troubleshooting; Table 120: Usb/Sd Card Files Cleanup - Grandstream Networks UCM6202 User Manual

Current Path
Directory
Delete Selected File

Syslog

On the UCM6200, users could dump the syslog information to a remote server under Web
GUIMaintenanceSyslog. Enter the syslog server hostname or IP address and select the module/level for
the syslog information.
The default syslog level for all modules is "error", which is recommended in your UCM6200 settings because it
can be helpful to locate the issues when errors happen.
Some typical modules for UCM6200 functions are as follows and users can turn on "notice" and "verb" levels
besides "error" level.
pbx: This module is related to general PBX functions.
chan_sip: This module is related to SIP calls.
chan_dahdi: This module is related to analog calls (FXO/FXS).
app_meetme: This module is related to conference bridge.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
Syslog is usually for debugging and troubleshooting purpose. Turning on all levels for all syslog modules is not
recommended for daily usage. Too many syslog prints might cause traffic and affect system performance.
----------------------------------------------------------------------------------------------------- ----------------------------------------------

Network Troubleshooting

On the UCM6200, users could capture traces, ping remote host and traceroute remote host for troubleshooting
purpose under Web GUIMaintenanceNetwork Troubleshooting.
The following sections shows the steps to capture different types of traffic traces for analysis purposes.

Table 120: USB/SD Card Files Cleanup

Displays the current path.
Select the directory user want to clean.
Select multiple entries to delete from USB or SD card.
UCM6200 Series User Manual
P a g e | 348