Configure Voicemail Group; Table 41: Voicemail Email Settings; Figure 59: Voicemail Group - Grandstream Networks UCM6510 IP PBX User Manual

Attach Recordings to E-Mail
Template For Voicemail Emails
Click on "Load Default Settings" button to view the default template as an example.

CONFIGURE VOICEMAIL GROUP

The UCM6510 supports voicemail group and all the extensions added in the group will receive the
voicemail to the group extension. The voicemail group can be configured under web GUI->PBX->Call
Features->Voicemail Group. Click on "Create New Voicemail Group" to configure the group.
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table 41: Voicemail Email Settings

If enabled, voicemails will be sent to user's Email address. The default
setting is "Yes".
Fill in the "Subject:" and "Message:" content, to be used in the Email
when sending to the user.
The template variables are:

\t: TAB

${VM_NAME}: Recipient's first name and last name

${VM_DUR}: The duration of the voicemail message

${VM_MAILBOX}: The recipient's extension

${VM_CALLERID}: The caller ID of the person who has left the
message

${VM_MSGNUM}: The number of messages in the mailbox

${VM_DATE}: The date and time when the message is left

Figure 59: Voicemail Group

UCM6510 IP PBX User Manual Page 139 of 229