The UCM6100 supports T.30/T.38 Fax and Fax Pass-through. It can convert the received Fax to PDF format and
send it to the configured Email address. Fax/T.38 settings can be accessed via Web GUI→Call
Features→FAX/T.38. The list of received Fax files will be displayed in the same web page for users to view,
retrieve and delete.
Configure Fax/T.38
•
Click on "Create New Fax Extension". In the popped-up window, fill the extension, name and Email address
to send the received Fax to.
•
Click on "Fax Settings" to configure the Fax parameters.
•
Click on
to edit the Fax extension.
•
Click on
to delete the Fax extension.
Enable Error
Correction Mode
Maximum Transfer
Rate
FAX SERVER
Figure 168: Fax Settings
Table 79: FAX/T.38 Settings
Configure to enable Error Correction Mode (ECM) for the Fax.
The default setting is "Yes".
Configure the maximum transfer rate during the Fax rate negotiation.
The possible values are 2400, 4800, 7200, 9600, 12000 and 14400.
The default setting is 14400.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
271