Inverter Exit Sensor, Transport Sensors 1 & 2 - Ricoh MT-C1 Service Manual

15 February 2006
3.10.8 INVERTER EXIT SENSOR, TRANSPORT SENSORS 1 & 2
B246R1046.WMF
[A]: Cross-stay ( x 4)
[B]: Reverse trigger roller shaft
[C]: Jogger fences (
[D]: Left half of table (
• The front screw is a shoulder screw. Insert the screws in the correct holes
when re-attaching.
• To avoid breaking the tabs under the left edge of the table, pull the table to
the right to disengage the tabs and then remove.
[E]: Inverter exit sensor (
[F]: Transport sensor 1 (harness x 1,
[G]: Transport sensor 2 (harness x 1,
[B]
[A]
[E]
x 1 each)
x 2)
x 1, harness x 1,
x 1)
x 1)
3-93
[G]
[F]
B246R1047.WMF
x 1)
DUPLEX UNIT
[C]
[D]