Inverter Exit Sensor, Transport Sensors 1 & 2 - Ricoh B064 Service Manual

3.10.8 INVERTER EXIT SENSOR, TRANSPORT SENSORS 1 & 2
B140R817.WMF
[A]: Cross-stay ( x 4)
[B]: Reverse trigger roller shaft
[C]: Jogger fences ( x 1 each)
[D]: Left half of table ( x 2)
• The front screw is a shoulder screw. Insert the screws in the correct holes
when re-attaching.
• To avoid breaking the tabs under the left edge of the table, pull the table to
the right to disengage the tabs and then remove.
[E]: Inverter exit sensor ( x 1, harness x 1,  x 1)
[F]: Transport sensor 1 (harness x 1,  x 1)
[G]: Transport sensor 2 (harness x 1,  x 1)
SM
[B]
[A]
[E]
3-91
DUPLEX UNIT
[C]
[G]
[F]
B140R818.WMF
B064 Series/B140 Series/G126
[D]