3.10.8 INVERTER EXIT SENSOR, TRANSPORT SENSORS 1 & 2
B064R764.WMF
[A]: Cross-stay (! x4)
[B]: Reverse trigger roller shaft
[C]: Jogger fences (! x1 ea.)
[D]: Left half of table (! x2)
• The front screw is a shoulder screw. Insert the screws in the correct holes
when re-attaching.
• To avoid breaking the tabs under the left edge of the table, pull the table to
the right to disengage the tabs and then remove.
[E]: Inverter exit sensor (! x1, harness x1, " x1)
[F]: Transport sensor 1 (harness x1, " x1)
[G]: Transport sensor 2 (harness x1, " x1)
SM
[B]
[A]
[E]
3-81
DUPLEX UNIT
[C]
[G]
[F]
B064R765.WMF
B064/B065
[D]