Preface; Using This Manual; Operator Qualifications And Safety Standards - Omicron Lab CT Analyzer User Manual

Preface

Using This Manual

This User Manual provides information on how to use the CT Analyzer. The
CT Analyzer User Manual contains important safety instructions for working with
the CT Analyzer and gets you familiar with operating the CT Analyzer. Read and
observe the safety rules described in "Safety Rules" on page 9 and all relevant
installation and operation instructions. Following the instructions in this User
Manual will help you to prevent danger, repair costs, and avoid possible down
time due to incorrect operation.
The CT Analyzer User Manual always has to be available at the site where the
CT Analyzer is used. It must be read and observed by all users of the
CT Analyzer. Reading the CT Analyzer User Manual alone does not release you
from the duty to comply with all relevant national and international safety
regulations.

Operator Qualifications and Safety Standards

Working on high-voltage power equipment can be extremely dangerous.
Testing with the CT Analyzer should only be carried out by authorized and
qualified personnel. Before starting to work, clearly establish the responsibilities.
Personnel receiving training, instruction, direction, or education on the
CT Analyzer should remain under the constant supervision of an experienced
operator while working with the equipment.
Testing with the CT Analyzer must comply with the internal safety instructions
as well as additional relevant documents.
In addition, observe the following safety standards, if applicable:
• EN 50191 (VDE 0104) "Erection and Operation of Electrical Equipment"
• EN 50110-1 (VDE 0105 Part 100) "Operation of Electrical Installations"
• IEEE 510 "IEEE Recommended Practices for Safety in High-Voltage and
High-Power Testing"
Preface
7