Using The Quick Test Feature - Omicron Lab CT Analyzer User Manual

Using the Quick Test Feature

8 Using the Quick Test Feature
Quick Test is an optional feature. The functionality described in this chapter is
only available if you have purchased a corresponding license. For further
information, please contact your OMICRON sales contact or the OMICRON
office nearest you.
If your CT Analyzer provides a vaild license for Quick Test, the functional scope
described in this chapter is also available in the CTA Quick Test PC software
included in the CT Analyzer PC Toolset.
The Quick Test feature cannot be used when a CT SB2 switch box is
connected to the remote control interface of the CT Analyzer.
Measurements using Quick Test are not automatically stopped by the
CT Analyzer. Such measurements have to be stopped manually.
The CT Analyzer possibly switches off its output automatically after a long
period (> 15 min) of continuous operation at its maximum output power to
prevent thermal overload of the device.
135