Default Settings On The Ct Analyzer For Multi-Ratio Ct Testing - Omicron Lab CT Analyzer User Manual

5 Default Settings on the CT Analyzer for
Multi-Ratio CT Testing
The CT Analyzer allows customization of the default settings for multi-ratio CT
How to get there:
testing using the CT SB2. These settings are defined using the
Press the Main soft key in
Select Startup Mode option in the Setting Menu of the CT Analyzer.
any test card on the
CT Analyzer
Open the Set Startup Mode page and press the Multi-Ratio soft key. The
Main Menu:
- Settings
Set Startup Mode page then looks as shown in Figure 5-1.
Select soft key
Setting Menu:
- Select Startup Mode
Select soft key
-> Set Startup Mode page
Figure 5-1
Modify the default settings according to your needs and press the Back soft key
to apply your default settings.

Default Settings on the CT Analyzer for Multi-Ratio CT Testing

Set Startup Mode page with Multi-Ratio startup mode selected
Mode at Startup According to the mode selected, the CT Analyzer
automatically initializes a single tap CT test, a multi-ratio
CT test or a QuickTest measurement after startup.
Select the mode using the soft keys Single Tap,
Multi-Ratio or Quick.
If the Multi-Ratio mode is selected, the CT test initialized
after switching on the CT Analyzer contains the
additional test cards MR-Config. and MR-Results for
multi-ratio CT testing.
Number of Taps The number of taps is the overall number of tap
connections available on the multi-ratio CT.
Select the default number of taps using the soft keys
No. of Taps 2 to No. of Taps 6.
The default number of taps defined here is used each
time a new multi-ratio CT test is initialized by selecting
"New MR-Test" from the main menu of the CT Analyzer.
33