Omicron Lab CT Analyzer User Manual page 181

813.xxx Warning [813.xxx] One or more parameters could not be found. Some calculations may
not work.
Reason:
Solution:
814.xxx Warning [814.xxx] You tried to load an old report. One or more parameters could not
be found. Some calculations may not work.
Reason:
Solution:
815.xxx Error [815.xxx] Folder must be empty. Can't remove folder <Folder Name>.
Reason:
Solution:
816.xxx Error [816.xxx] You tried to load a report built with a <Device>.
Reason:
Solution:
817.xxx Error [817.xxx] The xml file has no valid OMICRON report style.
Reason:
Solution:
818.xxx Warning [818.xxx] Moving of folders not supported.
Reason:
Solution:
819.xxx Warning [819.xxx] File name contains an invalid character.
Reason:
Solution:
820.xxx Error [820.xxx] Memory management error. Contact the next OMICRON service center.
Reason:
Solution:
821.xxx Error [821.xxx] Could not update firmware.
Reason:
Solution:
823.xxx Error [823.xxx] Could not update user text!
Reason:
Solution:
The .xml report file read from the Compact Flash card is of a newer format than
the device can generate.
The loaded file is incompatible or the software version on your CT Analyzer is
older than the software version that has generated the report. To enable your
CT Analyzer to read this report, it is necessary to update the CT Analyzer
software.
One or more entries could not be found in the .xml report file.
The software version on the CT Analyzer is newer than the software version
used to generate the report. The report probably does not contain all
parameters supported by the new CT Analyzer software.
The folder selected for deletion is not empty. Only empty folders can be
deleted.
Navigate to the folder you want to delete. Open the folder and delete all
contained files and subfolders. Then you can delete the empty folder.
The .xml file seems to be not a CT Analyzer report.
The report cannot be loaded by the CT Analyzer.
The .xml file has no valid OMICRON report style.
The report cannot be loaded by the CT Analyzer.
Moving of folders is not supported by the CT Analyzer.
Select only files to move, not folders. Using the shift key and the up/down
cursor keys it is possible to select any number of files within a folder.
An invalid character was used to specify the file name.
Invalid characters: \ / : * ? \ < > |
Only use valid characters for the file name.
Memory management error.
Switch the CT Analyzer off, wait a second then switch it on again. If this error
occurs more frequently, you should contact your next OMICRON service
center.
An error has occurred in the boot loader software.
Insert a Compact Flash card with valid software (CTAnalyzer.bin) in the
directory A:\Omicron\ and switch the CT Analyzer off and on again.
An error has occurred in the user text loader software.
Insert a Compact Flash card with valid software (CTUser_xxx.bin) in the
directory A:\Omicron\ and try again.
Error and Warning Messages
179